Dynamic Descaler® Clients!

The following is a partial list of customers who have approved and used Dynamic Descaler®:

  • Goodyear USA
  • Goodyear Canada
  • General Motors
  • Shell
  • Rubbermaid
  • Dow Chemical
  • Petro Canada
  • Ford Motors
  • Dayton Tire & Rubber Company
  • ExxonMobil
  • U. S. Army
  • British Royal Navy
  • United States Navy
  • Atlas Copco
  • Ingersoll Rand
  • Compair
  • Coco-Cola
  • 3M
  • Nash Engineering Company
  • Bombardier

Ford Motor Company - They have recently issued an international TOX Number 163908, for approved usage of Dynamic Descaler®
(Bio D'Scale) in all Ford plants worldwide.

The United States Navy has approved and is using Dynamic Descaler® on Condensers, Heat Exchangers, and CHT (Sanitation Lines).


Welding Guns and hoses checked by Ford Personnel after cleaning - now operating without heating. Scheduled to clean all their guns every 4 to 6 months to maintain problem free production.

Also, specialized hoses costs them approximately $215.00 US for 6 feet. Due to regular cleaning they do not have to be changed as often due to clogging! They have 700 hundred of those hoses!

What Our Customers Are Saying

"We first learned of Dynamic Descaler® a few years ago. We were using another descaler that worked but was too expensive. David sent us a sample of Dynamic Descaler®, and we immediately saw that it worked just as well and was more affordable."

--- Walt Dorn, Southern Paper Company

"This product is real safe. All you need is a pair of cloves and safety glasses, and you're good to go. It's also safe in terms of using it to clean things like condensors and heat exchangers. I have had the same set of 15 pumps for more than five years. Dynamic Descaler® has never damaged a single one."

---Bill Carpenter, Accurate Marine

"We call David and receive the product sometimes as early as the next day. We place large orders, and it still gets to us very quickly."

Alvaro Virgen, Roses Southeast Paper, LLC

Some Major Clients in Malaysia
 (Dynamic Descaler® is known as Bio D'Scale in Southeast Asia.)

  • Shell Refinery, Port Dickson
  • Matsushita Air Conditioning Corp. SDN. BHD.
  • Chemi-Con Malaysia
  • Lafarge Cement
  • Matsushita Compressor and Motor SDN. BHD.
  • Shangri La Hotel, Kuala Lampur
  • Perusahaan Otomobil Nasional BHD.
  • Kings Creameries SDN. BHD.
  • Mah Sing Plastics Industries SDN. BHD.
  • Furukawa Cables
  • Toyodempa, Melaka
  • Goodyear Tires, Shah Alam
  • Toyota Motors, Shah Alam
  • Ford Motors, Shah alam
  • Tasek Cement, Perak
  • Perak Hanjoong Cement, Perak
  • Swiss Garden Resort, Lumut
  • Toyo Plastics, Ipoh
  • Popular Rubber, Ipoh
  • Southern Steel, Prai
  • Watta Batteries, Kuala Lampur


Before
After

Shangri La Hotel - Complete Water Side Cleaning of High Pressure Steam Washer Heat Exchanger
Unable to remove cover as it was fused to the shell. Just 2 weeks prior to our cleaning one more heat exchanger of the same condition was replaced for approximately $4,500.00 US.

Observations:
The tube side is seen to be coated with a thick layer of rust, scale & mud. This would have tremendously retarded thermal transfer efficiency, causing extremely high operating costs and damage & eventual breakdown of the heat exchanger. Some tubes were partially clogged. Due to the age of the machine and the probable bad condition of the shell cover seals, the shell cover was not opened for a full view of the tube bundle. Because of this even manual cleaning could not be performed.

After 1 1/2 hours of circulation with Dynamic Descaler®, it can be clearly seen that the tube bundle has been cleaned to bare metal. All rust, scale and mud has been removed completely, bringing the heat exchanger to optimum operating condition on the waterside.